我的位置：
- 數字音視工程網/
- 產品中心/
- 產品詳情
巴可BARCO-Thecornerstoneofhomecinemasystemsdesignedtodeliveroutstandingexperiencesint-Balder CinemaScope projector
廠家報價：面議
產品狀態：(在產)
Theater&MediaRoomSeries5KUHDResolution(5,120x2,160)LaserPhosphorUpto5,600ANSILumens
產品品牌：
巴可BARCO
產品類別：
工程投影機
地址：北京市朝陽區太陽宮中路12號冠城大廈12層
電話：400-000-9370、400-882-2726、010-80101166(聯系就說在DAV音視工程網上看到的)
廠商介紹： 巴可BARCO是全球顯示行業領先的技術公司，主要為娛樂、企業和醫療保健市場設計開發網絡可視化和創新協作解決方案。巴可偉視（北京）電子有限公司為中國市場專業市場設計開發可視化解決方案：涉及控制室、國防與航天、數字影院、醫療保健、媒體與娛樂、模擬與虛擬現實。巴可BARCO產品包括專業工程投影機、數字影院... [詳細]
| 投影機類型 | Single chip DLP |
| 技術 | 0.9" DMD? |
| 分辨率 | 5,120 x 2,160 (5K UHD) |
| 寬高比 | 2.37:1 (CinemaScope) |
| 光源 | Laser phosphor |
| 光源使用期限 | 20,000 -60,000 hours Laser intensity dependent |
| 光輸出 | DCI (P3) Color Wheel: Up to 3,600 ANSI lumens T Color Wheel: Up to 4,000 ANSI lumens M Color Wheel: Up to 5,600 ANSI lumens |
| CLO（穩定光輸出） | Yes |
| 對比度 | 1,800:1 Sequential 450:1 ANSI |
| 亮度均勻性 | >90% |
| 透鏡范圍 | (R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation) (R9801832) - FLDX UST (0.41:1) - 90° Lens (R9802244) - EN67 (0.65:1) (R9802243) - EN66 (0.80 -1.21:1) (R9802003) - EN76 (0.95 -1.30:1) (R9802242) - EN63 (1.20 -1.70:1) * (R9802241) - EN61 (1.70 -2.50:1) * (R9801211) - EN44 (2.50 -4.60:1) * Standard Lens Option(s) |
| 光學鏡片移動 | Up to 122% vertical lens shift & up to 40% horizontal lens shift (depending on lens selection) Visit the Barco Residential Lens Calculator for further information Download Lens & Airflow Data Here |
| 擋光板 | Yes |
| 色彩糾正 | P7 RealColor? |
| 色階度 | DCI (P3) Color Wheel: DCI P3 T Color Wheel: REC.709 M Color Wheel: REC.709 |
| 圖像處理 | Embedded Warp & Blend Engine |
| WARP | 4-Corner Warp & Bow Correction via Warp Engine |
| 安裝角度 | 360° Rotation |
| 網絡連接 | 10/100 Ethernet via RJ45 connection |
| 集成網絡服務器 | Yes |
| 診斷 | via Prospector web interface |
| HDR | HDR10 |
| 3D | Active Stereoscopic 3D Additional hardware required please contact an authorized Barco representative for details |
| 輸入 | 1 x HDMI 2.0 (HDCP2.2) 1 x HDBaseT (HDCP1.4 - 9Gbps only) 2 x Dual Link DVI-D 2 x Display Port (1.2) 12G-SDI 1 x RJ45 Ethernet 1 x RS232 1 x Remote Control (RC) 3 x USB (2 x Rear, 1 x Front) DMX (1 x Input, 1 x Output) |
| 輸入分辨率 | From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz or up to 2,560 x 1,600 @ 120Hz |
| 延遲 | TBD |
| 控制 | IR, RS232, IP, 12v Trigger Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them. Download our integration guide for more information. |
| 電力要求 | 100 - 240V / 50 - 60Hz |
| 功率消耗 | 1,100 W - Max. |
| 待機功耗 | Standby ECO Mode: 110v - 0.73W (with LAN Connection) 230v - 0.82W (with LAN Connection) |
| 每小時BTU | 4,000 BTU/h - Max. |
| 噪音級別（典型，25°C/77°F時） | 36 dB(A) |
| 工作溫度 | 10 to 45 °C at Sea Level Optimal Set Point: 20 °C |
| 工作濕度 | 20 to 80% (relative humidity) |
| 氣流要求 | Air Inlet (from Rear w/Feet Down): Right Side Exhaust (from Rear w/Feet Down): Rear Clearance Requirements: Front: 1cm Left: 1cm Right: 50cm Rear: 100cm Top: 1cm |
| 排風量 | 112 ft 3 /min @ 25 °C 190 m 3 /hour @ 25 °C Download Lens & Airflow Data Here |
| 尺寸(寬x長x高) | Excluding Lens 475 x 588 x 286 mm 18.7 x 23.1 x 11.3 in. |
| 凈重 | Excluding Lens 37 kg / 81.5 lbs |
| 裝運尺寸 | Excluding Lens 730 x 600 x 480 mm 28.7 x 23.7 x 18.9 in. |
| 毛重 | Excluding Lens 43 kg / 94.8 lbs |
| 標準配件 | Power Cord, Remote Control |
| 認證 | CE, FCC Class A and cCSAus |
| 安全要求 | This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 6.0 is installed. Refer to the installation manual for further information. |
| 24/7 operation | This projector is designed and warranted for heavy duty 24/7 operation. Specific measures and design considerations have been made in order for it to comply with stringent requirements in challenging applications. |
| 保修期 | Limited 3 years parts and labor Extendable up to 5 years |
| * | Firmware upgradable Please contact an authorized Barco representative for details |
